mirror of
https://github.com/Adam-Ant/mqtt-dash
synced 2024-11-05 12:16:22 +00:00
33 lines
1.4 KiB
Markdown
33 lines
1.4 KiB
Markdown
# Amazon Dash Button to MQTT Bridge
|
|
|
|
Sends an MQTT message when an Amazon Dash button press is detected.
|
|
|
|
Dash detection code based on [sejnub/docker-amazon-dash-sniff](https://github.com/sejnub/docker-amazon-dash-sniff)
|
|
|
|
## Dash Button Setup
|
|
3. Go through the normal Dash button setup in the Amazon app, but when asked to select a product, simply exit out of the setup process.
|
|
|
|
4. Find the mac address of the Amazon button. This can usually be achieved through your router. If in doubt, use a [MAC address vendor checker](https://macvendors.com/) to make sure the MAC is reigstered to "Amazon Technologies inc."
|
|
|
|
5. (Optional) Block the button from accessing the internet. Different routers have different ways of achieving this, but typically a simple IPTables rule will achieve this.
|
|
|
|
## Usage
|
|
1. Install Python (>= 2.7), as well as scapy, configparser and paho-mqtt from pip.
|
|
|
|
2. Clone this repo
|
|
|
|
3. Run main.py to generate the example config.
|
|
|
|
4. Edit the config provided to include your MQTT host, as well as the MAC addresses of the button and the corresponding MQTT channels to message. (See the config for examples.)
|
|
|
|
5. Run main.py
|
|
|
|
** OR **
|
|
1. Run the docker image:
|
|
``` docker run -d --net=host --name="mqtt-dash" -v $YOUR_CONFIG_DIRECTORY:/config adamant/mqtt-amazon-dash```
|
|
|
|
2. Edit the config provdided by the program.
|
|
|
|
3. Start the container again:
|
|
``` docker start mqtt-dash ```
|